Furuno DRS4W, Operator'S Manual, Page: 20 / 36

3. INSTALLATION
14
Installation with the radome mount
The optional radome mount lets you fasten
the radar sensor to a mast on a sailboat.
Name, Type : Radome Mount, OP03-209
Code No. : 001-078-350
How to assemble the bracket
1. Fasten the fixing plates to brackets (1)
and (2) with four M8
×
20 hex bolts.
2. Fit brackets (1) and (2) loosely with sup-
port plates (1) and (2) using four M4
×
12
hex bolts, so that the gap between the
brackets can be adjusted.
3. Place the mounting plate on the bracket
and fix it loosely with four M8
×
20 hex
bolts.
How to fasten the bracket to the mast
1. Drill eight holes of 6.5 mm diameter in the
mast and fix the bracket with eight stain-
less steel rivets (local supply) of 6.4 mm
diameter.
2. Tighten the bolts on the bracket.
3. Fasten the radar sensor to the bracket.
Connect the power cable to the power source,
observing the guidelines for laying the power
cable shown on this page.
Name Type Code No. Qty
Mounting
plate 03-018-
9001-0 100-206-
740-10 1
Support
plate (1) 03-018-
9005-0 100-206-
780-10 1
Support
plate (2) 03-018-
9006-0 100-206-
790-10 1
Bracket
(1) 03-028-
9101-1 100-206-
811-10 1
Bracket
(2) 03-028-
9101-2 100-206-
812-10 1
Fixing
plate 03-028-
9103-1 100-206-
831-10 2
Hex bolt
w/washer M8
×
20
SUS304
000-162-
955-10 8
Hex bolt
w/washer M4
×
12
SUS304
000-162-
956-10 4
Mounting plate
Support
plate (1)
Support
plate (2)
Bracket (1)
Fixing
plate
M8×20
ASSEMBLED
RADOME MOUNT
M8×20
M8×20
M4×12
How to assemble the radome mount
Rivet
M10×25
How to fasten the sensor to the radome mount
Bracket (2)