Furuno CSH-23F Operator'S Manual Download

Page: 82 / 114

10-2

Saving the Picture

You can save either the whole screen or the echo inside the esti-
mate mark to the internal memory or a memory card.

1. Press the MENU key to display the USER menu.

2. Select SAVE PICTURE.

3. Select item to save:

Whole:

Saves whole picture to memory card.

Est MK: Saves echo inside the estimate mark to internal

memory. (About 20 pictures can be saved.)

QK Save: Saves whole screen to the internal memory. (One

picture can be saved.)

4. Press the END key to close the USER menu.

5. Press the MEMO key on the main panel.

It takes about two minutes to save a whole screen to a memory
card. During this time the normal picture is displayed but the
unit accepts no key input.

Transferring Echo Data from Internal Memory to
Memory Card

1. Press the MENU key to display the USER menu.

2. Press arrow keys to select CARD ECHO DAT.

3. The display shows all inside-estimate mark pictures stored

in the internal memory. Using the arrow keys select picture
to save to memory card.

4. Press the MENU key. The lamp to the right of the memory

card drive lights while picture data is being saved.

5. Press the END key several times to return to the USER menu.

Summary of Contents for CSH-23F



















































































































Search results

Summary of Contents for CSH-23F

Reviews:

Related manuals for CSH-23F

Brands by name

Popular brands

Furuno CSH-23F, Operator'S Manual

Search results

Summary of Contents for CSH-23F

Reviews:

Related manuals for CSH-23F

Brands by name

Popular brands