Furuno CI-68, Installation Manual

Page: 15 / 75

2-1
2. MOUNTING
2.1 Monitor Unit/Control Unit
The monitor and control units can be installed as one unit or two separate units. The
optional “separate monitor unit installation kit” is necessary when installing them as
separate units. See "Mounting the control unit separately" on page 2-3. Further, these
units can be mounted in a panel (requires optional flush mount kit), together or sepa-
rately. See the outline drawings at the back of this manual for details.
Desktop mounting
Monitor unit and control unit
1. Fasten the mounting base to the mounting location with four tapping screws
(5x20).
Mounting base
• Locate the units out of direct sunlight and hot air.
• The operator should face the bow while viewing the display screen.
• Select a location where the display screen can be easily observed while operating the
control unit.
• Environmental temperature should be -15 to 55°.
• Select the place well-ventilated.
• Locate the units at the place with minimal vibration.
• Keep the unit away from the magnetic field.
• Leave sufficient space around the units for maintenance and servicing. Recommend-
ed maintenance space appears in the outline drawing at the back of this manual.
Turn off the power at the
switchboard before beginning the
installation.
Fire or electrical shock can result if
the power is left on.
WARNING NOTICE
Do not apply paint, anti-corrosive
sealant or contact spray to coating or
plastic parts of the equipment.
Those items contain organic solvents that
can damage coating and plastic parts,
especially plastic connectors.
Front