Furuno CI-68 Operator'S Manual Download Page 48

Page: 48 / 72

3. CUSTOMIZING THE SYSTEM

3-16

Trip time alarm

The trip alarm sounds when the preset trip time has elapsed.

1. Press the [MENU] key to open the menu.
2. Press

▲

to place the cursor on the main menu title field.

3. Press

◄

►

to choose ALARM.

4. Press

▲

▼

to choose TRIP-TIME.

5. Press

►

to show the trip time alarm setting screen.

**TRIP ALARM**

TRIP TIME

0 hr

: 0 min

: 0 sec

ANY FUNC KEY: QUIT

KEY: SELECT

t u

KEY: SET

Time trip alarm setting screen

6. Press

▲

▼

to choose item to set.

7. Press

◄

►

to set.

8. Press any function key to quit and return to the ALARM menu. “

” appears to the right

of TRIP-DIST. When the alarm setting is violated the audible alarm sounds and an alarm
message appears.

9. Press the [MENU] key to close the menu.

3.5.4 Disabling/enabling the audible alarm

1. Press the [MENU] key to open the menu.
2. Press

▲

to place the cursor on the main menu title field.

3. Press

◄

►

to choose ALARM.

4. Press

▲

▼

to choose the alarm you want to process. (An alarm where

appears.

5. Press

◄

►

to show

as appropriate.

6. Press the [MENU] key to close the menu.

3.5.5 Disabling an alarm

1. Press the [MENU] key to open the menu.
2. Press

▲

to place the cursor on the main menu title field.

3. Press

◄

►

to choose ALARM.

4. Press

▲

▼

to choose the alarm you want to disable.

5. Press any function key, and the following window appears.

AREA IS ALREADY SET

SET: t u

ARE YOU SURE TO RESET?

YES

PRESS ANY FUNCTION KEY AFTER SETTING.

6. Press

►

to choose YES.

7. Press any function key to return to the ALARM menu. The

is removed.

8. Press the [MENU] key to close the menu.

Summary of Contents for CI-68









































































Search results

Summary of Contents for CI-68

Reviews:

Related manuals for CI-68

Brands by name

Popular brands

Furuno CI-68, Operator'S Manual

Search results

Summary of Contents for CI-68

Reviews:

Related manuals for CI-68

Brands by name

Popular brands