Furuno CH-37 Operator'S Manual Download Page 67

Page: 67 / 90

6-3

SCREEN ADJUSTMENT

H.SIZE

H. POSITION

V. SIZE

V. POSITION

DEFLECTION DIST.

BRIGHTNESS

EXIT : PRESS MENU KEY

Effective picture
marker (inside)

Effective picture
marker (outside)

Figure 6-2 Screen adjustment screen

4. Select item with up and down arrow keys.

5. Adjust item with left and right arrow keys:

H.SIZE:

Sets picture size in horizontal direc-
tion.

[→]

, increases size;

[←]

, de-

creases size.

H. POSITION:

Adjusts picture position in horizontal
direction.

[→]

[←]

shift right, left,

respectively.

V.SIZE:

Sets picture size in vertical direc-
tion.

[→]

, increases size;

[←]

, de-

creases size.

V. POSITION:

Adjusts pictureposition in vertical
direction.

[→]

[←]

shift right, left,

respectively.

DEFLECTION DIST: Adjust deflection in vertical direc-

tion. Adjust

[→]

[←]

to obtain

square picture.

BRIGHTNESS:

Adjust CRT brilliance.

[→]

, brighter;

[←]

, dimmer.

5. To return to the SYSTEM menu, press the MENU key.

Summary of Contents for CH-37



























































































Search results

Summary of Contents for CH-37

Reviews:

Related manuals for CH-37

Brands by name

Popular brands

Furuno CH-37, Operator'S Manual

Search results

Summary of Contents for CH-37

Reviews:

Related manuals for CH-37

Brands by name

Popular brands