Furuno CH-37 Operator'S Manual Download Page 50

Page: 50 / 90

3-6

3.7 Horizontal, Vertical and Event Markers

(trackball operation)

The trackball functions to obtain the data (horizontal range and
depth) from own ship to the specified position on the screen
and, combined with the R/B and EVENT keys, switches the
Horizontal, Vertical and Event markers on/off.

Event
marker*

Horizontal
and Vertical
markers

1) Position the trackball marker on the desired location.

2) Press the EVENT key.
3) To erase the marker, place the trackball marker outside

the echo display area and press the EVENT key.

Note: CH-37 stores one event marker.

1) Position the trackball marker on the desired location.
2) Press the R/B key. The horizontal and vertical markers

appear and the distance to the intersection of the mark-
ers is indicated at the bottom left-hand side of the
screen.

3) To erase the marker, place the marker outside the echo

display area and press the R/B key.

Event marker*

Vertical marker

Horizontal marker

Echo display area

Distance to the intersection
of the markers.

* Requires navigation data.

(Continued on next page)

Summary of Contents for CH-37



























































































Search results

Summary of Contents for CH-37

Reviews:

Related manuals for CH-37

Brands by name

Popular brands

Furuno CH-37, Operator'S Manual

Search results

Summary of Contents for CH-37

Reviews:

Related manuals for CH-37

Brands by name

Popular brands