13
Furuno BBWX4 SiriusXM Receiver Installation Guide
Connect the Network Cable
The Network Cable should be connected to your
Furuno system. This cable has two different
connectors - one end connects to the Furuno
system and the other to the BBWX4 Receiver. The
cable is marked near each end to distinguish the
connectors.
If your Furuno system does not utilize a Network
Switch, connect the RJ45 end of the cable to the
Furuno MFD’s Ethernet port.
If your Furuno system utilizes a an HUB101 or
equivalent Network Switch, connect the RJ45 end
of the cable to the Network Switch. If there are
no available connections on the existing Network
Switch, you will need to purchase another Network
Switch to accommodate the BBWX4 Receiver.
Connect the 7-pin end of the cable to the
NETWORK
connection of the BBWX4 Receiver.
Connect the Audio Cable
(optional)
The audio connection is optional and is used if you
subscribe to a SiriusXM music and entertainment
package in addition to the SiriusXM Marine
subscription package.
If you are not installing an audio connection, do not
remove the water resistant cap that is installed on
the BBWX4 Receiver’s
AUDIO
connector.
The Audio Cable provides an RCA-style Left and
Right audio connection. Connect these to the
auxiliary (AUX) input on your audio device.
If your audio system does not have RCA connectors
they will need an adapter cable, available from the
local dealer or an electronics retailer.
Remove the water resistant cap that is installed
on the BBWX4 Receiver’s
AUDIO
connector, and
connect the Audio Cable.
ANTENNA
AUDIO
M A R I N E
NETWORK
R E C E I V E R
POWER
InfoLINK
AUDIO
ANTENNA
AUDIO
M A R I N E
NETWORK
R E C E I V E R
POWER
InfoLINK
NETWORK
