Furukawa electric S178, User Manual

Page: 114 / 162

Programming Guide
8-10
8.2.3. Copy
Follow the procedures shown below to copy the selected
program and paste it to a new location.
1. Select “Copy” and press Enter key in the pop-up menu.
2. Select a new destination for the program. The locations of
the factory pre-installed programs can not be selected.
3. Press Enter key to paste the program.
8.2.4. Delete
Follow the procedures shown below to delete the selected
program.
1. Select “Delete” and press Enter key in the pop-up menu.
2. Pop-up message will be displayed on the screen asking
“Delete Program?”. Press Enter Key to proceed the
operation.
3. Select “Yes” and press Enter key to delete the program; or
select “No” and press Enter key to cancel the operation. The
factory pre-installed programs can not be deleted.