11
Installation
Monitor Installation
Positioning the Monitor
•
Ensure the the is placed so that it does not obstruct vision when driving.
•
Do not place in an area where it might interfere with driving.
•
The surface area should be clean, smooth & flat.
Connecting the Monitor
•
Route the power cable to the vehicle’s cigarette lighter socket/12/24V power
outlet. The cable must not interfere with the safe operation of the vehicle.\
•
Insert the small 12/24 Volt DC plug of the power cable into the right side of the
monitor.
•
Plug the 12/24 Volt cigarette lighter plug into the vehicle’s cigarette lighter
socket.
With the lock open,
position the mount.
Press mount down
against the surface.
Push the mount lock
down.
Adjusting the View Angle
•
Swivel & Tilt the mount to set the
optimum viewing angle.
•
Lock the position by tightening the
locking screws.
1
1
