Furrion FDFS40M1A, Instruction Manual

Page: 18 / 92

17
Change Settings
English
Picture Settings
1. Press MENU button, the setup window will
appear on the screen.
2. Use
or
key to highlight Picture mode.
3. Use or to highlight the item you would
like to reset, then press
or
to select the
settings.
4. Press MENU to return to the previous menu
or press EXIT at any time to exit the setting.
Picture Settings
Picture
Mode
Selects the display
mode.
Press or to select Power Saving, Standard, Dynamic, Soft or User
display modes.
Brightness
Controls the brightness
level of the picture.
Press or to change the brightness to desired level.
*Only adjustable after set “ Picture Mode” as “ User“ mode.
Contrast
Controls the contrast
level of the picture.
Press or to change the contrast to desired level.
*Only adjustable after set “ Picture Mode” as “ User“ mode.
Color
Controls the color level
of the picture.
Press or to change the color to desired level.
*Only adjustable after set “ Picture Mode” as “ User“ mode.
Tint Controls picture tint.
Press or to change the tint to desired level.
* Only available under NTSC mode.
Sharpness
Controls the sharpness
of the picture.
Press or to change the sharpness to desired level.
*Only adjustable after set “ Picture Mode” as “ User“ mode.
Color
Temperature
Selects the color mode.
Press or to select Normal, Warm or Cool.
Advanced
Settings
Advanced picture
settings.
Aspect
Press or to select Wide, Zoom, Cinema or Normal.
Noise Reduction
Press or to select Middle, High, Off or Low.
Dynamic Contrast
Press or to select On or Off.