CCD-0005559 Rev: 04-29-22
- 22 -
Install and Use Monitor
Tap twice on the monitor screen to show the
control menu. It will stay 5 seconds, then go
back to previous single camera view.
Icon
Description
Tap to enter quadrant mode.
The selected mode will
remain for 10 seconds before
returning to the previous
single channel mode.
Tap to decrease the volume of the
monitor.
Tap to increase the volume of
the monitor.
Tap to mute the monitor.
Tap to return to the previous
page.
Change Menu Settings
There are four options that allow you to set
up the wireless vehicle observation / security
system before operation.
Tap one of the four options to enter the
setting page or tap to return to the previous
page.
Camera Setting
Tap
SETUP
to highlight it in red and enter the
submenu automatically.
Auto Display Setting
When this function is enabled, the monitor
can switch back to single-channel display
mode automatically after the monitor stays in
3-channel or 4-channel display mode for 10
seconds.
1. Tap
AUTO DISPLAY
to enter the submenu.
2. Tap the
AUTO DISPLAY
switch to
highlight it red and enable this function.
Here, you can tap
QUAD-View
to enter
