7
Installation
English
Step 1 -
Mounting the Wall
Plate on Wall
Warning:
Do not drill into mortar joints.
Be sure to drill holes centered within studs or
bricks.
A. Mounting on solid concrete or
concrete block wall
1. Choose a proper height for your TV. Level
the wall plate paper template on wall and
paste it in place for your safe drilling.
Note: This is the drilling template to be pasted
on wall for drilling holes easily and safely
.
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
16 in. (406.4 mm) apart
Drill here for solid concrete or concrete block wal
l only
Drill here for solid concrete or concrete block wal
l only
Paper Template
2. Using a 3/8" (10 mm) drill bit , drill 6 pilot
holes into solid concrete.
Note:
Pilot holes must be drilled to a
depth of 3" (75 mm).
Note: This is the drilling template to be pasted
on wall for drilling holes easily and safely
.
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
16 in. (406.4 mm) apart
Drill here for solid concrete or concrete block wal
l only
Drill here for solid concrete or concrete block wal
l only
3. Remove the wall plate paper template
from wall and insert 6 concrete anchors
(C) into the holes. You can use a hammer
to lightly tap the anchors into place if
necessary.
Caution:
Ensure that the anchor is flush
with the concrete surface.
4. Install the wall plate on wall using 6 lag
bolts (A) and washers (B).Tighten the lag
bolts securely so that wall plate is firmly
attached to wall.
Warning:
Do not over tighten. Over
tightening can damage the lag bolts,
greatly reducing their holding power.
