Output Type and Power
Rated Output
Power
350W continuous/400W max.(30Mins)/800W
surge
AC Output Socket
NEMA 5-15R, AC 120V, 60Hz, 400W max.
USB C Output Port
5V/3A, 9V/3A, 15V/3A, 20V/3A, 60W max.
USB Fast Charge
Output Port
5V/3A, 9V/2A, 12V/2A, 24W max.
USB Output Port
(x2)
5V/2.4A each, 24W max. total
Input Type and Power
DC Inlet
DC jack 6.5 x 3.0mm
DC Input
11 - 22 Vdc, max. 8A, 100W max.
Power Adapter
Input
100–240Vac
Output
19Vdc, 4.74A
Cigarette Lighter Cable
Input
11 - 22 Vdc
Current Rating
8A max.
Troubleshooting
Problem
Possible Cause
Solution
Battery
does not
charge
The AC adapter is not connected
or not connected well.
Make sure the AC adapter cable is properly
connected to the power station.
Damaged AC adapter.
Contact Furrion to purchase a new AC adapter.
Attempting operation outside of
the operating temperature range.
Place the product in ambient temperatures of 32°F
to 104°F (0 to +40°C).
Charging stops due to fault in
circuit.
Stop charging immediately and contact the retail
store or Furrion customer service center.
The battery is has not been fully
inserted into the power station.
See “
Inserting/Removing the Furrion ePod™
Battery
” on page 8 - Information for correctly
inserting battery into the power station.
Stored over a longer period of
time.
Charge the battery every 6 months.
Battery reached the end of its
service life.
Dispose of properly and order a replacement Furrion
ePod™ Battery.
Input power, current, or voltage
is outside of the charging
parameters of the ePod power
station.
Make sure that the power supplier connected to the
DC input socket is less then 100W, 8A, and between
10.5-24Vdc.
14