Furrion DV3300S-BL, Instruction Manual, Page: 34 / 41

6. To play an audio file from an external Bluetooth device(mobile phone) on the wall
mount Stereo
7.To setup your Stereo using NFC(only support mobile phone with NFC function)
(1) Turn on the NFC function of your mobile phone and make sure the screen is active
and unlocked.
(2) With the NFC detection area on your phone touch the NFC detection area
of the
Stereo, you can connect or disconnect your mobile phone with the Stereo
conveniently.
Note: The first time you pair and connect, it will ask you to input a password.
The password is “0000”.
5.1 Incoming call ringing, short press TEL button on the remote control or 1 button on
the front panel to accept the call.
(1) Short press TEL button on the remote control or 1 button on the front panel,
it will show last phone number on the LCD, then it will execute the dialing.
(2) Short press
REDIAL button on the remote control, it will dial the last phone number.
5.2 To reject Incoming call ringing, short press HANG UP button on the remote control
or 2 button on the front panel to REJECT the call.
5.3 During a phone call, short press HANG UP button on the remote control
or 2 button on the front panel to end the call.
Note:
During other modes(except Bluetooth conversation), press BT MODE button on the
front panel to switch the mode with others.
Note: When an incoming call is present the caller’s phone number will be displayed
on the screen.
After the device has been paired successfully and Wall mount Stereo screen displays
LINK OK
If your mobile device supports A2DP you will then be able to stream music from
your Bluetooth device so it can be played by stereo speaker.
You must select on your mobile Bluetooth device to play the audio through Bluetooth.
If your mobile device supports AVRCP then you will be able to control the basic phone
audio output functions by the Wall mount Stereo controls.
Eg
.
Play Pause
.
32