Furrion DV3300S-BL, Instruction Manual, Page: 18 / 41

4. Mute
Press
MUTE button to mute what ever source is playing and display mute on the
screen.
Press
MUTE button again to resume.
5.
Clock Set
1) To display the clock on the LCD display, press CLOCK button on the remote control.
2) To adjust or set the clock, press and hold CLOCK button on the remote control.
until the clock set feature is displayed on the LCD display of the stereo then use
VOLUME KNOB on the unit or + and - on the remote control to adjust the time,
push in the volume knob on the stereo or press SEL button on the remote control
to change from setting hours to minutes. Once time is set the stereo will automatically
set after a few seconds without any operating.
6. To select a preset EQ mode
Press and hold
BT button on the front panel or briefly press EQ button
on the remote control to select the preset music equalizer curves:
CINEMA, ROCK, CLASSIC, FLAT.
The sound effect will be changed.
7. To turn on/off LOUD mode
Press and hold
LOUD button on the remote control to turn on/off LOUD
mode.
8.To adjust the sound equalizer curves
To adjust the sound equalizer curves, briefly and repeatedly press
SEL button on
the remote control to select the sound equalizer curves of VOL, BAS(without
preset EQ), TRE (without preset EQ), BAL,BEEP(ON/OFF), then rotate the
VOL KNOB on the front panel or press the + and - on the remote control to adjust
level.
9.ZONE 1/2 BUTTON
Pressing
ZONE 1 or 2 button will turn on or off the audio source in each of
the different areas which your speakers are connected. “ZONE <1>” or
“ZONE <2>” will display on the LCD once it is selected
.
10.Press the button or TITLE button to return to the previous menu.
11.To reset the unit
When the display is incorrect, or the function buttons are not effective or
sound is distorted, then use a sharp point to press
RESET button, that
will make the unit be reset to factory default and re-instate the correct functions.
16