Furrion DV3050, Instruction Manual

Page: 5 / 16

5. To mute or resume sound
Press MUTE button on the remote control to eliminate or resume sound immediately
during playback.
6. To select and adjust the mode of the sound and menu
Press SEL button repeatedly to select the mode of AF ON/AF OFF mode, TA ON/TA OFF
PTY NEWS/PTY MUSICS, NEWS/POP M, BASS,TRE(treble), LIR(balance),
LOUD OFF/LOUD ON, VOL LAST/VOL DEFA, BEEP ON/BEEP OFF, DX/LOCAL
(in RADIO mode), STEREO/MONO(in RADIO mode), SUBW ON
/SUBW OFF, CLK XX XX, in the sequence and circulation.
In each item, rotate the VOL KNOB to select your desired mode.
1) VOL LAST/VOL DEFA
VOL LAST: The volume level when switching off will be restored with power On.
VOL DEFA: The volume level of the main unit after power on is a constant value.
When selecting VOL DEFA item, press SEL button to display AVOL , then you can preset
the constant volume level after power on with VOL control.
2) BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
3) DX/LOCAL
Radio station search mode is divided by this DX/LOCAL switch, which can be used to
control an attenuator in the tuner during search. The detecting level of seek, scan,
auto-memory will be reduced as much as the attenuated level of the tuner. In radio mode,
press the LOC button to change local reception or distance reception. (Note: This button
is only for FM reception. In AM mode, LOC is invalid.)
4) CLK XX XX
When select CLK XX XX mode, Rotate the VOL KNOB to adjust HOUR, press SEL button
for confirmation. With the same means to adjust MINUTE.
7. To select a preset EQ mode
Press and hold BT button on the front pane to select the preset music equalizer curves:
FLAT, CLASSIC, ROCK, CINEMA, EQ OFF. The sound effect will be changed.
8. ZONE 1/2 Button
Pressing
ZONE 1
or
2
button will turn on or off the audio source in each of the different
areas which your speakers are connected. “ZONE <1>” or “ZONE <2>” will display on
the LCD once it is selected .
9. To reset unit
When the display is incorrect, or the function buttons are not effective or
sound is distorted, then use a sharp point to press RESET button, that
will make the unit be reset to factory default and re-instate the correct functions.
PAGE 3
CCD-0005532 | REV DATE: 11.29.22