Furnlink CORIO MK2 Assembly Instructions Download Page 3

Page: 3 / 3

STEP 5.

Hand tighten the Long Bolts into the front of the chair, as shown. Do not tighten with Allen Key or
Electric drill yet.

STEP 6.

Fasten the Short Bolts into the back of the chair, using the Allen Key provided

an Electric Drill with

a Hex Drill Bit.

STEP 7.

Now, tighten the front bolts using the Allen Key or the Electric Drill. Your chair is complete!

Front of Chair

Long Bolt

Washer

Back of Chair – use Allen Key to tighten

use Electric Drill

Summary of Contents for CORIO MK2

Page 1: ...ASSEMBLY INSTRUCTIONS FOR CORIO MK2 CHAIR ...

Page 2: ...ats 2 x Long Bolts 2 x Short Bolts 4 x Washers 1 x Allen Key STEP 2 Place the padded seat upside down on a bench top or sturdy table with the back of the seat narrower end toward the edge of the bench as shown STEP 3 Place the Chair onto the seat pad as shown Back of Chair Back of seat narrow end STEP 4 Place the washers over each bolt ...

Page 3: ... STEP 6 Fasten the Short Bolts into the back of the chair using the Allen Key provided or an Electric Drill with a Hex Drill Bit STEP 7 Now tighten the front bolts using the Allen Key or the Electric Drill Your chair is complete Front of Chair Long Bolt Washer OR Back of Chair use Allen Key to tighten Or use Electric Drill ...