Furnlink CORIO MK2 Assembly Instructions Download Page 2

Page: 2 / 3

ASSEMBLY INSTRUCTIONS FOR CORIO MK2 CHAIR

STEP 1.

Unpack the boxes. Each box should contain:

4 x Chairs (with no seat attached)
4 x Padded Seats
2 x Long Bolts
2 x Short Bolts
4 x Washers
1 x Allen Key

STEP 2.

Place the padded seat upside down on a bench top or sturdy table, with the back of the seat
(narrower end) toward the edge of the bench as shown.

STEP 3.

Place the Chair onto the seat pad as shown.

Back of Chair

Back of seat (narrow end)

STEP 4.

Place the washers over each bolt

Summary of Contents for CORIO MK2

Page 1: ...ASSEMBLY INSTRUCTIONS FOR CORIO MK2 CHAIR ...

Page 2: ...ats 2 x Long Bolts 2 x Short Bolts 4 x Washers 1 x Allen Key STEP 2 Place the padded seat upside down on a bench top or sturdy table with the back of the seat narrower end toward the edge of the bench as shown STEP 3 Place the Chair onto the seat pad as shown Back of Chair Back of seat narrow end STEP 4 Place the washers over each bolt ...

Page 3: ... STEP 6 Fasten the Short Bolts into the back of the chair using the Allen Key provided or an Electric Drill with a Hex Drill Bit STEP 7 Now tighten the front bolts using the Allen Key or the Electric Drill Your chair is complete Front of Chair Long Bolt Washer OR Back of Chair use Allen Key to tighten Or use Electric Drill ...