Follow us on Instagram
@furniturebox_uk
STEP
1
Use a clear, flat, soft surface to avoid bumps or scratches.
Place top panel [1] face down on your flat surface.
Add 2x dowels [D] to the inside holes and 2 x long rod bolts [A] to the outside
holes at the end of bottom panel [1].
Add 1 x rod bolt [A] to the single hole towards the opposite end of panel [1].
Carefully align and drop side panel [2] over the long rods and onto the
dowels at the end of panel [1]. Then add 2 x dowels [D] to the outside holes in
the top of panel [2}.
Add 1 x gasket [C] to the single rod, followed by 1 x tubular support {B] and
another gasket [C].
ATTENTION:
Be careful not to over-screw beyond the thread stops.
