furniture123 AGL047, User And Installation Manual

Page: 5 / 22

4
ELECTRICAL SAFETY
The heater must not be located under an electrical socket; the socket must
always be accessible in order to disconnect the heater from the electrical
supply for maintenance and cleaning.
Important: This heater must be earthed. The mains supply must be safely
routed from the heater to an electrical socket.
• If the supply cord is damaged, it must be replaced by the manufacturer,
service agent or a similarly qualified person in order to avoid a hazard.
• This appliance is supplied with a BS1363 3 pin plug fitted with a 13 Amp
fuse. Should the fuse require replacement, it must be replaced with a fuse
rated at 13 Amp and approved to BS1362.
• In the event the mains plug has to be removed or replaced for any reason.
NOTE: The wires in the mains lead on this appliance are coloured in
accordance with the following code:
•
Green and Yellow - Earth
•
Blue - Neutral
•
Brown - Live
NOTE: As the colours may not correspond with
the markings identifying the terminals in your plug, please proceed as follows.
• The green and yellow wire must be connected to the terminal in the plug
which is marked with the letter E or with the earth symbol or coloured green
and yellow.
• The blue wire must be connected to the terminal marked N or coloured
black.
• The brown wire must be connected to the terminal marked L or coloured
red.
Important - any cut off plug should be disposed of safely to prevent a hazard.
There is a danger of electric shock if a cut off plug is inserted into a socket
outlet.