5
ASSEMBLY INSTRUCTION
Assembly Dining Table-Fit Leg
Please prepare work area as set out on page 2:
As indicate in diagram below lay table rim [B] upside down. With the help of a second person
take leg [c] aline holes at top of leg with threaded holes in rim and then by hand insert bolt [D]
with washer [E] thru hole in leg and into threaded hole, turn bolt 2-3 times to ensure thread has
gripped correctly. Test by lightly pulling back on bolt. DO NOT TIGHTEN. Repeat for other 3
bolts. Once all bolts are seated correctly, take tool [G] and tighten bolt until they feel firm. Do
not overtighten as you may cause damage to thread. Repeat for other leg.
Move to next page.
