ASSEMBLY INSTRUCTIONS
Page 11
X2
STEP7
Hardware #4 = 2sets
Hardware #15 = 2sets
STEP8
Hardware #7 = 2pcs
Hardware #14 = 6sets
ASSEMBLY IS COMPLETED
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
J
J
Extend the two outer slides of the runners so that
they are align with the sides of the drawer. Make
sure the pre-drilled holes from the drawer align with
the screw holes of the outer slides. Secure two
screws from the inside of the drawer using a Phillips
screwdriver to tighten them to the outer slides.
N
4
7
J
10
15
4
push spring down to insert doors
S
14
