ASSEMBLY INSTRUCTIONS
ASSEMBLY IS COMPLETED
Make
sure
the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
Extend the two outer slides of the runners so
that they are align with the sides of the drawer.
Make sure the pre-drilled holes from the
drawer align with the screw holes of the outer
slides. Secure two screws from the inside of
the drawer using a Phillips screwdriver to
tighten them to the outer slides.
Page 13
of
13
Hardware #6
=
2pcs
STEP12
6
