ASSEMBLY INSTRUCTIONS
Page 11
STEP7
Hardware #6 = 4pcs
STEP8
Hardware #8 = 4pcs
Hardware #14 = 4pcs
6
14
8
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
Extend the two outer slides
of the runners so that they
are align with the sides of
the drawer. Make sure the
pre-drilled holes from the
drawer align with the screw
holes of the outer slides.
Secure two screws from the
inside of the drawer using a
Phillips screwdriver to tight-
en them to the outer slides.
ASSEMBLY IS COMPLETED
Page 8
Align (8) to the back, then
insert screws (14).
