Unless you are particularly adept at assembling
fl
at-pack/knock-down
furniture, we understand building ready-to-assemble furniture can be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following:
1.
Due to the size and/or weight on most of the ready-to-assemble furniture, it is
highly recommended that the assembly should be done near the area of its
intended location. Make sure you have enough space to move around during
the assembly. ALWAYS have at least two people to help with transporting and
assembling of the product to avoid any potential injury and/or damage.
2.
To protect from damage, assemble the item on a clean, protective surface,
such as on a carpet or cardboard.
3.
Make sure you have taken all the parts and hardware out of their packaging.
Do not throw away packaging material until assembly is completed.
4.
Make sure all parts and hardware are accounted by comparing the actual parts
and hardware to the list provided in the assembly instructions. Also check for
irregularity such as crack,
fl
aw or improperly drilled hole. If there is any
problem or missing piece, please contact the manufacturer or the supplier. By
having the model number, part number and a brief description of the problem
ready will help expedite the replacement process.
5.
Read the entire instructions and view the diagrams
fi
rst before assembling.
Arrange your parts in order of use and group the identical hardware together
will make it easier to grab each piece as you begin to assemble.
6.
During the assembly process, make sure all parts are properly aligned before
tighten with the tool provided or required for the assembly. Do not use power
tools and do not over tighten.
7.
When applying glue to the wood dowels to bond the parts together
,please
be
ABSOLUTELY certain that the parts are correct and line up with each other
(
refer to diagrams and take notice of the various pre-drilled hole locations).
When in doubt, assemble the parts together
fi
rst and if the parts
fi
t right, then
apply glue to the wood dowels.
PRE- ASSEMBLY INTRODUCTION
Page 3 of 7
Summary of Contents for YNJ-1411-4
Page 1: ......
Page 3: ...Page 2 of 7...
Page 5: ...CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Page 4 of 7...
