Turn right (clockwise) to tighten
Page 5 of 5
#C x 8 pcs
#E x 8 pcs
#F x 8 pcs
I.
Align the 2 front legs (#1) with the pre-drilled holes on the corners of the seat
(#2).
II.
Prepare 4 bolt assemblies by inserting FIRST the lock washer (#E) onto the
bolt (#C) and then the flat washer (#F) onto the SAME bolt (#C), in that order.
X 2
ASSEMBLY IS COMPLETED
X 2
Note: Right and left are determined by standing
behind the chair in the upright position.
I.
Align the left armrest (#4) with the pre-
drilled holes of the backrest with legs
(#3) AND the seat (#2).
II.
Prepare a bolt assembly by inserting
FIRST the lock washer (#I) onto the
bolt (#A) and then the flat washer (#J)
onto the SAME bolt (#A), in that order.
V.
Repeat the process above to assemble
the right armrest (#5) onto the backrest
with legs (#3) AND the seat (#2).
VI. Make sure the chair is rested on a flat
surface and does not feel loose or
wobbly. If it does, double check that the
bolts are secured and properly
tightened.
#A x 8 pcs
#H x 4 pcs
#I x 8 pcs
#J x 4 pcs
#5
#2
III.
Insert the bolt assemblies through the pre-drilled holes in the corners of the
seat (#2) and secure those bolts using the Allen wrench (#G) to lock them
with the two front legs (#1).
III.
Insert that bolt assembly through the
seat (#2) and secure that bolt using the
Allen wrench (#
G) to lock it with the
lower left armrest (#4).
IV. Prepare a bolt assembly by inserting
the lock washer (#I) onto the bolt (#A).
Insert that bolt assembly through the
backrest with legs (#3) using the Allen
wrench (#
G) to lock it with the upper left
arm (#4). Once tighten, place the bolt
cover (#H) over the bolt.
