I.
Place the backrest with legs (#3) on a protected surface. Align
the seat (#2) with the pre-drilled holes of the backrest with legs
(#3).
II.
Prepare a bolt assembly by inserting FIRST the lock washer
(#E) onto the bolt (#B) and then the flat washer (#F) onto the
SAME bolt (#B), in that order.
III.
Insert the bolt assembly through the pre-drilled hole on the
center of the seat (#2) and secure that bolt using the Allen
wrench (#G) to lock it with the backrest with legs (#3).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 4 of 5
#B x 2 pcs
#E x 2 pcs
#F x 2 pcs
#D x 8 pcs
#E x 8 pcs
#F x 8 pcs
I.
Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#E) onto the bolt (#D) and then the flat washer (#F) onto the
SAME bolt (#D), in that order.
II.
Insert the bolt assemblies through the pre-drilled holes in the
corners of the seat (#2) and secure those bolts using the Allen
wrench (#G) to lock them with the backrest with legs (#3).
X 2
X 2
