1. Align the middle tubes
to the frames, then insert
the bolts (#C) into the
center holes. Secure using
Allen wrench (#H).
2. Insert the bolts (#B) into each end of the middle tubes and secure.
Align the support tubes (#14)
to the bottom frames, then
insert the bolts (#B) into
the holes from above. Secure
using the Allen wrench (#H).
Summary of Contents for Olga CM-BK913FF
