Apply glue onto the wood dowels (#D)
and insert into the bottom right frame (#4).
Apply glue onto the other ends and
insert shelves (#8,9).
1.
I. Insert the barrel nut (#C), Slide the Phillip head screw (#A) through the hole on the
side of the post piece until it bumps against the nut.
II. Use your screwdriver to rotate the barrel nut (#C) until the hole is lined up with the
end of the screw. Hold the barrel nut in position with your screwdriver. Simultaneously
use the wrench to turn the screw. Continue tightening until the bolt is fully seated.
2.
Apply glue onto the wood dowels (#D)
and insert into the bottom left frame (#3).
Apply glue onto the other ends and
insert shelves (#8,9).
1.
I. Insert the barrel nut (#C), Slide the Phillip
head screw (#A) through the hole on the
side of the post piece until it bumps
against the nut.
II. Use your screwdriver to rotate the barrel
nut (#C) until the hole is lined up with the
end of the screw. Hold the barrel nut in
position with your screwdriver.
Simultaneously use the wrench to turn
the screw. Continue tightening until the
bolt is fully seated.
2.
Summary of Contents for Lyss CM-AC6214
Page 1: ...For more information contact our team service ec foagroup com 17 04 27...
Page 2: ......
Page 3: ......
Page 4: ...Fabric...
