Furniture of America Luminar CM3559SV, Assembly Instructions

Page: 5 / 5

Page 5 of 5
Step 4
To install the batteries (not included), remove
the screw that holds the battery cover by using
a Phillips screwdriver. Install new AA-size 1.5-
volt alkaline batteries with correct polarity (

,

)
following the illustration inside the battery cover.
Close the battery cover and tighten back the
screw.
Step 3
Turn right (clockwise) to tighten
Tilt the glass shelf (#3) at an angle and gently have it
rested and leveled on top of all 4 of the shelf
supports. Repeat the process for the other side.
Caution:

Use only batteries of the same type.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.

Do not use rechargeable batteries.

Do not try to recharge non-rechargeable batteries.

Remove exhausted or corroded batteries.

Remove batteries to extend their life and to prevent
corrosion if the light is not be used for at least 2 weeks.
Enlarged