Furniture of America Egaleo CM5814TV, Assembly Instructions Manual

Page: 6 / 8

I. Insert 2 cam bolts (#F) into the pre-
drilled holes along the back side of
the top panel (#5). Secure using the
Phillips screwdriver.
II. Insert 4 cam bolts (#D) into the outer
corner pre-drilled holes of the top
panel (#5) as shown and secure using
a Phillips screwdriver. Then insert 4
wood dowels (#G) into the remaining
holes of the top panel.
III. Insert 2 cam locks (#E) into the back
panel and 4 cam locks (#C) into the
side panels (#7/6).
IV. Insert the top panel (#5) onto the back
and side panels. Lock the cam locks
with the cam bolts using a Phillips
screwdriver.
I. Apply the the assembled bottom panel
upside down onto the shelf leg and pole.
II. Insert a flat washer (#J) and hex nut (#I)
onto the threaded end of the stud bolts
(#A), Secure using the socket wrench (#R).
III. Insert a flat washer (#j) then hex nut (#I)
onto the threaded ends of the stud bolt (#B)
located on the leg. Secure using the
socket wrench (#R).
IV. Align 2 bottom caps (#15) to the pre-
drilled holes along the sides of the bottom
panel (#14) Insert bolts (#P) and secure
using the Allen wrench (#S).