Furniture of America Egaleo CM5814TV, Assembly Instructions Manual

Page: 5 / 8

I. Insert the stud bolt (#B) into a pre-
drilled hole on the glass top (#1).
Turn right to tighten. Insert the shelf
leg (#4) and then the cap (#Q) onto
that stud bolt.
II. Insert 2 stud bolts (#A) into the
remaining 2 pre-drilled holes on the
glass top (#1). Turn right to tighten.
Then insert the pole (#3) onto those
bolts.
I. Insert 2 cam bolts (#F) into the pre-drilled holes along the back side of the
bottom panel (#14). Secure using the Phillips screwdriver.
II. Insert 4 cam bolts (#D) into the 4 outer pre-drilled holes as shown and
secure using the Phillips screwdriver. Then insert 4 wood dowels (#G) into
the remaining 4 inner holes in the bottom panel (#14).
I. Insert the back panel (#8) onto
the cam bolts (#F) and the left/
right side panels (#7/6) onto the
cam bolts (#D) and wood dowels.
II. Insert 2 cam locks (#E) into the
back panel and 4 cam locks (#C)
into the side panels (#7/6). Lock
the cam locks with the cam bolts
using a Phillips screwdriver. I. Remove the rails inside of the drawer rails (#N).
II. Align the drawer rails (#N) to the pre-drilled holes along the sides of the side panels
(#7/6) and insert 2 screws (#O) into each rail. Secure using a Phillips screwdriver.