2. Align the legs (#5) to the
holes along the bottom of
the headboard (#1) and
footboard (#3). Insert 4
screws (#G) and 2 bolt
assemblies (#A) into each
leg. Secure using the Allen
wrench and a screwdriver.
1. Prepare 8 bolt assemblies by
first inserting a lock washer (#B)
onto the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
1. Prepare 8 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align each end of the side rails (#2) to
the hole along the the headboard (#1) and
footboard (#3). Insert the bolts and secure.
Summary of Contents for CM7678CK
