Step 3
Step 4
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 5 of 6
Enlarged
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
I.
Align the two slat support legs (#7) with the pre-drilled holes of the
central support rail (#4). Prepare 2 bolt assemblies by inserting FIRST
the lock washer (#E) onto the bolt (#B) and then the flat washer (#D)
onto the SAME bolt (#B), in that order.
II.
Insert the two bolt assemblies through the pre-drilled holes of the central
support rail (#4) using the Allen wrench (#H) to lock them in with the slat
support legs (#7).
III.
Repeat the process for the other slat support legs (#7) and the central
support rail (#4).
Adjust the leveler according to the ground
level. To lower or to raise the slat support
leg, you need to turn the leveler clockwise
or counterclockwise, respectively.
Enlarged
#B x 8 pcs
#D x 8 pcs
#E x 8 pcs
I.
Align the two central
support rails (#4) with the
pre-drilled holes on the
headboard (#1) and the
footboard (#3).
II.
Prepare 8 bolt assemblies
by inserting FIRST the lock
washer (#E) onto the bolt
(#B) and then the flat
washer (#D) onto the
SAME bolt (#B), in that
order.
III.
Insert the 8 bolt assemblies
through the brackets of the
central support rails (#4)
using the Allen wrench (#H)
to lock them in with the
headboard (#1) and the
footboard (#1).
X 2
Summary of Contents for CM7060IV-CK
Page 2: ...Page 2 of 6...
