Page 9 of 10
Turn right (clockwise) to tighten
I.
Aligned the assembled side
rail support (#7) with the pre-
drilled holes on each side of
the side rails (#2).
II.
Secure two screws (#K) into
each end of the side rail
support (#7) using a Phillips
screwdriver to tighten them
with the two side rails (#2).
III.
Repeat the process above to
assemble the remainder two
side rail supports (#7) onto
the two side rails (#2).
#K x 6 pcs
I.
Align the assembled center
support rail (#4) with the pre-
drilled holes on the center of
the headboard (#1) and the
footboard (#3).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#E) onto the bolt (#B)
and then the flat washer (#D)
onto the SAME bolt (#B), in
that order.
III.
Insert the 4 bolt assemblies
through the center support rail
(#4) using the Allen wrench
(#H) to lock them with the
headboard (#1) and the
footboard (#3).
Turn right (clockwise) to tighten
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
Summary of Contents for CM7009Q
Page 2: ...Page 2 of 10...
