Page 5 of 10
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Note: Right and left are determined by
facing the front of the drawer in its
upright position.
I.
Align the drawer right side (#13) and the drawer left side (#14)
with the pre-drilled holes on the drawer front (#12).
II.
Secure 3 screws (#I) each into the drawer right side (#13) and
the drawer left side (#14) using a Phillips screwdriver to tighten
them to the drawer front (#12).
III.
Repeat the process above to assemble the remaining 5 drawers.
I.
Insert the drawer bottom (#16) into the grooves.
II.
Align the drawer rear (#15) with the pre-drilled holes on the
drawer right side (#13) and the drawer left side (#14).
III.
Secure 3 screws (#I) each into the drawer right side (#13) and
the drawer left side (#14) using a Phillips screwdriver to tighten
them to the drawer rear (#15).
IV.
Repeat the process above to assemble the remaining 5
drawers.
#I x 36 pcs
#I x 36 pcs
X 6
X 6
Summary of Contents for CM7009Q
Page 2: ...Page 2 of 10...
