Furniture of America CM4644WH-C, Assembly Instructions Manual

Page: 4 / 6

Turn the cam
connector with a
screwdriver until
it will not turn any
more with light to
moderate force.
Two parts should fit snuggly
against each other.
Secure the
threaded end
of the cam
bolt by using
a screwdriver.
Insert the cam lock
bolt into the pre-
drilled hole above
the cam connector.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
Turn right (clockwise) to tighten
Note: Every cam lock bolt must have a cam lock connector in order to fasten the parts together.
Align the cam connector with its
side opening (or arrow)
pointing to the small
drilled hole.
Turn right (clockwise) to tighten
I. Carefully place the table top (#1)
facing down on a protected surface.
Insert two wood dowels (#E) into the
corner of the table top (#1).
II. Align the leg (#2) with the wood
dowels (#E) and the pre-drilled hole
in the corner of the table top (#1).
III. Prepare a bolt assembly by inserting
FIRST the lock washer (#B) onto the
bolt (#C) and then the flat washer
(#A) onto the SAME bolt (#C), in
that order.
IV. Insert the bolt assembly through the
pre-drilled hole on the leg (#2) and
secure that bolt using the Allen
wrench (#D) to lock it in with the
table top (#1).
V. Repeat the process for assembling
the remaining 3 legs (#2) onto the
table top (#1).
#A x 3 pcs
#B x 3 pcs
#C x 3 pcs
#E x 6 pcs
Page 4 of 6