.
Carefully turn the completed table upright. Make sure the table is
rested on a flat surface and does not feel loose or wobbly. If it does,
double check that the screws are secured and properly tightened.
Turn right (clockwise) to tighten
Page 5 of 5
ASSEMBLY IS COMPLETED
#C x 4 pcs
#D x 2 pcs
#F x 4 pcs
I.
Insert two wood dowels (#D) into
the pre-drilled holes on the center
of the assembled cross legs (#1 &
#2).
II.
Align the base (#3) with the two
wood dowels (#D) and the pre-
drilled holes on the assembled
cross legs (#1 & #2).
III. Insert 4 flat washers (#C) onto 4
screws (#F). Then insert the
screws (#F) through the pre-drilled
holes of the base (#3) using the
Phillips screwdriver to lock them
with the assembled cross legs (#1
& #2).
Summary of Contents for CM4641C
Page 2: ...Page 2 of 5...
