Parts List
Hardware List
#1 x 1 pc
Inner Cross Leg
#2 x 1 pc
Outer Cross Leg
#3 x 1 pc
Base
#A x 6 pcs
Screw 6x35mm
#B x 4 pcs
Sticker
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
#C x 4 pcs
Flat Washer
MD
#D x 6 pcs
Wood Dowel
#4 x 1 pc
Table Top
Page 3 of 5
Wood dowel joints are meant to hold together the
two sides of the structure by acting as a
connector. By applying glue (#G) to the wood
dowel, it will make the joint stronger.
1.
Remove one end of the wood dowel and
squeeze a drop of glue onto it. The glue
should cover the tip of the wood dowel.
2.
Insert the glued end of the wood dowel into
its appropriate location. Use a rag or paper
towel to wipe any excess glue oozing
around the wood dowel.
3.
Squeeze a drop of glue onto the end of the
wood dowel sticking out. The glue should
cover the tip of the wood dowel. Insert this
end of the wood dowel into the other part.
Both sides should now line up and touch.
4.
Use the paper towel or rag to wipe off any
excess glue.
#E x 4 pcs
Screw 4x50mm
#F x 4 pcs
Screw 7x58mm
#G x 1 pc
Glue (Optional)
Summary of Contents for CM4641C
Page 2: ...Page 2 of 5...
