Turn right (clockwise) to tighten
Page 4 of 5
#B x 2 pcs
#D x 2 pcs
#E x 2 pcs
#G x 1 pc
Turn right (clockwise) to tighten
I.
Place the backrest with legs
(#1) on a protected surface.
Insert a wood dowel (#G) into
the center hole of the backrest
with legs (#1).
II.
Align the seat (#2) with the
wood dowel (#G) and the pre-
drilled holes of the backrest
with legs (#1).
III.
Prepare 2 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt (#B)
and then the flat washer (#E)
onto the SAME bolt (#B), in
that order.
IV.
Insert the bolt assemblies
through the pre-drilled holes
on the seat (#2) and secure
those bolts using the Allen
wrench (#F) to lock them with
the backrest with legs (#1).
I.
Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#D) onto the bolt (#A) and then the flat washer (#E) onto the
SAME bolt (#A), in that order.
II.
Insert the bolt assemblies through the pre-drilled holes on the
corners the seat (#2) and secure those bolts using the Allen
wrench (#F) to lock them with the backrest with legs (#1).
#A x 4 pcs
#D x 4 pcs
#E x 4 pcs
Summary of Contents for CM3823BKPC2PK
Page 2: ...Page 2 of 5 ...
