Turn right (clockwise) to tighten
Page 6 of 6
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
I.
Align the 2 front legs (#3) with the pre-
drilled holes on the corners of the seat
(#2).
II.
Prepare 4 bolt assemblies by inserting
FIRST the lock washer (#D) onto the
bolt (#B) and then the flat washer (#E)
onto the SAME bolt (#B), in that order.
III.
Insert the bolt assemblies through the
pre-drilled holes in the corners of the
seat (#2) and secure those bolts using
the Allen wrench (#F) to lock them with
the two front legs (#3).
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
I.
Align the left armrest (#3) with the pre-
drilled holes of the backrest with legs
(#1) AND the seat (#2).
II.
Prepare a bolt assembly by inserting
FIRST the lock washer (#D) onto the bolt
(#C) and then the flat washer (#E) onto
the SAME bolt (#C), in that order.
III.
Insert that bolt assembly through the seat
(#2) and secure that bolt using the Allen
wrench (#F) to lock it with the seat (#2).
IV. Secure the other end of the left armrest
(#3) with a screw (#G) through the
backrest with legs (#1) using a Phillips
screwdriver to lock it with the left armrest
(#4).
V.
Repeat the process above to assemble
the right armrest (#4) onto the backrest
with legs (#1) AND the seat (#2).
VI. Make sure the chair is rested on a flat
surface and does not feel loose or wobbly.
If it does, double check that the bolts are
secured and properly tightened.
#C x 2 pcs
#D x 2 pcs
#E x 2 pcs
#G x 2 pcs
#G
Note: Right and left are
determined by facing the front of
the chair in its upright position.
#1
Summary of Contents for CM3557AC-2PK
Page 3: ...Page 3 of 6 ...
