I.
Place the backrest with legs (#1)
on a protected surface. Align the
seat (#2) with the pre-drilled
holes of the backrest with legs
(#1).
II.
Prepare a bolt assembly by
inserting FIRST the lock washer
(#D) onto the bolt (#C) and then
the flat washer (#E) onto the
SAME bolt (#C), in that order.
III.
Insert the bolt assembly through
the pre-drilled hole on the center
of the seat (#2) and secure that
bolt using the Allen wrench (#F)
to lock it with the backrest with
legs (#1).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 5 of 6
#C x 1 pc
#D x 1 pc
#E x 1 pc
#A x 4 pcs
#D x 4 pcs
#E x 4 pcs
I.
Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt
(#A) and then the flat washer
(#E) onto the SAME bolt
(#A), in that order.
II.
Insert the bolt assemblies
through the pre-drilled holes
in the corners of the seat (#2)
and secure those bolts using
the Allen wrench (#F) to lock
them with the backrest with
legs (#1).
Summary of Contents for CM3557AC-2PK
Page 3: ...Page 3 of 6 ...
