I.
Place the backrest with legs (#1)
on a protected surface. Insert
two wood dowels (#G) into the
holes of the backrest with legs
(#1).
II.
Align the seat (#2) with the wood
dowels (#G) and the pre-drilled
holes of the backrest with legs
(#1).
III.
Prepare a bolt assembly by
inserting FIRST the lock washer
(#B) onto the bolt (#D) and then
the flat washer (#A) onto the
SAME bolt (#D), in that order.
IV.
Insert the bolt assembly through
the center hole of the seat (#2)
and secure that bolt using the
Allen wrench (#F) to lock it with
the backrest with legs (#1).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 5 of 6
#A x 1 pc
#B x 1 pc
#D x 1 pc
#G x 2 pcs
#A x 4 pcs
#B x 4 pcs
#C x 4 pcs
I.
Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#B) onto the bolt (#C) and then the flat washer (#A) onto the
SAME bolt (#C), in that order.
II.
Insert the bolt assemblies through the pre-drilled holes in the
corners of the seat (#2) and secure those bolts using the Allen
wrench (#F) to lock them with the backrest with legs (#1).
Summary of Contents for CM3339-SC-2PK
Page 3: ...Page 3 of 6 ...
