Furniture of America CM-AC120 Assembly Instructions Manual Download Page 5

Page: 5 / 6

Step 3

Step 4

Align and insert the support shelf (#3) with
the pre-drilled holes of the two legs (#2).

Turn right (clockwise) to tighten

Page 5 of 6

#A x 4 pcs
#B x 4 pcs
#C x 4 pcs

Enlarged

Align the third leg (#2) with the
pre-drilled holes onto the table
top (#1) AND the support shelf
(#3).

II.

Prepare 2 bolt assemblies by
inserting a lock washer (#C)
onto the bolt (#A) and then the
flat washer (#B) onto the
SAME bolt (#A), in that order.

III. Insert two bolt assemblies

through the two pre-drilled
holes of the table top (#1) and
secure those bolts using the
Allen wrench (#D) to lock them
in with the leg (#2).

IV. Repeat the above process to

assemble the fourth leg (#2).

Summary of Contents for CM-AC120

Page 1: ... in assembling a specific product with 1 being easy and 5 being difficult For some products two persons are recommended Allen Wrench Included Assembly Instructions Tools Required for Assembly Rev 14 03 18 Page 1 of 6 DIFFICULT ASSEMBLY RATING CM AC120 Phillips Screwdriver Not Included ...

Page 2: ...Page 2 of 6 ...

Page 3: ...upport Shelf A x 8 pcs Bolt 1 4 x1 3 8 B x 8 pcs Flat Washer Before you begin please read Page 2 of Assembly and Care Advice And remember do not tighten until each step is completed or instructed C x 8 pcs Lock Washer MD D x 1 pc Allen Wrench Page 3 of 6 E x 4 pcs Screw ...

Page 6: ...legs 2 Turn right clockwise to tighten Page 6 of 6 E x 4 pcs Enlarged ASSEMBLY IS COMPLETED Carefully turn the completed table upright Insert the drawer back into the table top Make sure the table is rested on a flat surface and it does not feel loose or wobbly If it does double check that the bolts are secured and properly tighten ...