Step 1
I.
Carefully place the table top (#1)
facing down on a protective
surface. Align the leg (#2) with
the 2 pre-drilled holes onto the
table top (#1).
II.
Prepare 2 bolt assemblies by
inserting a lock washer (#C) onto
the bolt (#A) and then the flat
washer (#B) onto the SAME bolt
(#A), in that order.
III.
Insert two bolt assemblies
through the two pre-drilled holes
of the table top (#1) and secure
those bolts using the Allen
wrench (#D) to lock them in with
the leg (#2).
IV. Repeat the above process to
assemble the second leg (#2) but
on the opposite side of the first
leg.
Step 2
Turn right (clockwise) to tighten
Page 4 of 6
#A x 4 pcs
#B x 4 pcs
#C x 4pcs
Enlarged
#1
Remove the drawer out of the table top (#1)
until assembly is completed.
Summary of Contents for CM-AC120
Page 2: ...Page 2 of 6 ...
