C
A
B
L
E
T
R
A
Y
GRO
VE
Align slots on the cable tray and secure with two bolts from the
bottom. These hangers will mount to a the workstation. Insert
Beam Grommet Covers.
*NOTE: End Caps (BTEC) are optional, follow the same install
process with or without end caps.
Adjust cable tray to approximate width of surface. Insert the screw
through the overlapping beam slots and into the black plastic
piece. Slightly tighten the screw with only a few turns.
DO NOT
fully tighten.
1
|
ATTACH TRAY HANGERS AND END CAPS*
2
|
INSERT BEAM LOCK
13
