L
-S
H
A
P
E
GRO
VE
Position the surface on the desk frame. Align the outer sides of
the surface flush and parallel with the outer sides of the end legs.
Adjust beam positions if sides are not flush. Fasten the surface to
the desk frame with wood screws through the leg brackets into the
underside of the surface.
5
|
SECURE SECOND SURFACE
6
|
SECURE SAG BAR, BRACKETS AND FINISH
Secure the flat plates to the end of the return and side of main
surface with wood screws. Place anti-sag bars as shown below and
secure to underside of surface using wood screws.
Tighten the screw on the main profile beam.
8
