1.
Unpack in the room the bed is intended to be used,
remove all packaging and dispose of carefully,
keeping polythene out of the reach of children.
CONTENTS:
• 1 x Head board
• 1 x Foot board
• 2 x Side Rails
• 2 x Base boards
• 1 x Static Frame (New Construction)
• 4 x M8X50mm Hex Bolts (For Slatted Frame to
Hinge)
• 4 x M8 Nuts (For Slatted Frame to Hinge)
• 1 x Transformer
• 1 x Power cable with 3 Pin Plug
• 1 x Extension cable
• 2 x 9v Batteries
SAFETY FEATURES:
TOOLS REQUIRED
CAUTION WITH ASSEMBLY
DANGER – RISK OF INJURY / CRUSHING
Introduction
and components
Some stages of this Bed Assembly will require two
people to hold and lift components that maybe heavy.
2
To activate
Child Lock;
press small hole with
pointed object (like
the sort of thing
you’d remove a
sim card from your
mobile phone with)
Once
activated
the Green Light
will turn off.
Turn off the Child Lock
by
repeating this step.
Your bed is fitted with a child lock on the button
controler on the side. Activating the child lock will
prevent the base lifting when the buttons are pressed.
our bed will be delivered and installed with the
child lock activated, you will need to de-activate the
lock before using for the first time.
The ottoman must only be operated by responsible
and capable adults.
Never allow children to operate the ottoman.
Always engage the child safety lock when the
ottoman is not in use.
ENTRAPMENT
DANGER
The following tools are required for this assembly
1 x Socket Set - 13mm Spanner
1 x Cross Head Screwdriver (also known as a Phillips)
Summary of Contents for POWER OTTOMAN
Page 4: ...4 ...
