• Lift each side and lock each of the
black brackets in place.
• Place the
Head end
first as shown.
• Place the
Foot end
slatted frame
in place and then move onto next
step.
• Carefully lifting “by hand” the two slatted frames with the
outer frame still in place, secure with the four wooden
screws in the positions as shown in this diagram.
• With all the previous steps now completed,
turn the Bed onto it’s side ready to accept
the motor and corded remote.
6. Lower the slatted frames into the base.
7. Fix slatted frames in place
8. Turn the Bed onto it’s side
Easier to lower in
from the side.
Head End
Foot End
B
B
BB
A
A
A
A
Please Note that these
are not pre-drilled
Please Note:
this step will require two
people and requires lifting.
