8
Quick Start Guide
This section requires the following equipment.
●
6-channel R/C Radio SPEKTRUM DSM2/DSMX transmitter, 5.8 GHz FPV receiver
system/display/goggles, PC for detailed configuration, and (optional) HD camera
1. Bind Moskito with your Spektrum TX
Guide Bind Receiver Moskito with Transmitter.
Press Ctrl+Click your TX to go to
Guide bind
SpekTrum
2. Set up channel map on the Transmitter for a new Moskito configuration; throttle, yaw, roll, pitch,
arm and flight mode is required (6 channels minimum)
3. Open Betaflight and connect Moskito with PC via USB port, go Receiver tab. Check All channel
between Transmitter with interface
Betaflight
.
4. With the receiver detected over Spektrum DSMX, follow the wizard guide to set the control end
points for all five channels, when complete, exit the menu and test the flight mode switch to make sure
it
toggles between “
ANGLE
”, “
HORIZON
” and “
ACRO
” and
ARM function
.
5. Check Video signal. Default video transmitter frequency is
A1
(
Band A channel 1)
. If you want to set
the video transmitter power
please click
Guide set up Transmitter
.
6.
Lastly,re-asembley camera mount and put the battery underneath kit and use the rubber strap fix
battery to the frame.
Spin up by switch Arm channel and turn off by Dis-Arm
